How to Protect Magnetic Charging Contacts

Reading Time: 5 minutes

Direct Answer

Protect magnetic charging contacts by keeping them free from water, cleanser, lubricant, lint and metal debris.

After cleaning, dry the product fully and inspect both contact surfaces before connecting the cable.

Use only the approved charger, align it without force and disconnect it if you notice heat, corrosion or unstable charging.

Key Takeaways

• A waterproof product is not safe to charge while wet.

• Magnetic connectors can attract tiny metal objects that interfere with contact.

• Unusual heat, discolouration or corrosion is a reason to stop charging.

Before Connecting Power

Confirm that the product is switched off and completely dry.

Wipe the contacts with a clean, lint-free cloth using only a method allowed by the manufacturer.

Examine the cable for:

• Cuts

• Bent parts

• Exposed wires

• Corrosion

• Moisture

• Metal debris

Keep charging contacts and magnets away from jewellery, paper clips and other small metal objects.

During Charging

Place the product on a dry, stable surface away from sinks, baths and bedding.

Connect the approved cable in the correct orientation.

Do not force the magnets into alignment or use an adapter that the manufacturer has not approved.

Stop Charging If

• The connector becomes unusually hot.

• The charging indicator repeatedly starts and stops.

• You see green, white or dark corrosion.

• The cable or enclosure is swollen or damaged.

• There is an unusual smell or sound.

Frequently Asked Questions

Can I clean the contacts with alcohol?

Only if the manufacturer specifically approves the concentration and method. Liquids may enter seams or affect coatings.

Why will the cable not stay attached?

Check for reversed alignment, debris or physical damage. Do not hold it in place using tape or pressure.

Can I use another magnetic charger that fits?

Physical fit does not prove electrical compatibility. Use only the approved cable or replacement.

Where should I store the cable?

Keep it dry, loosely coiled and separate from metal debris and liquids.